Simultaneous measurement of glucose and glutamine in aqueous solutions by near infrared spectroscopy

A method is described for measuring the concentrations of both glucose and glutamine in binary mixtures from near infrared (NIR) absorption spectra. Spectra are collected over the range from 5000–4000/cm (2.0–2.5μm) with a 1-mm optical path length. Glucose absorbance features at 4710, 4400, and 4300/cm and glutamine features at 4700, 4580, and 4390/cm provide the analytical information required for the measurement. Multivariate calibration models are generated by using partial least squares (PLS) regression alone and PLS regression combined with a preprocessing digital Fourier filtering step. The ideal number of PLS factors and spectral range are identified separately for each analyte. In addition, the optimum Fourier filter parameters are established for both compounds. The best overall analytical performance is obtained by combining Fourier filtering and PLS regression. Glucose measurements are established over the concentration range from 1.66–59.91 mM, with a standard error of prediction (SEP) of 0.32 mM and a mean percent error of 1.84%. Glutamine can be measured over the concentration range from 1.10–30.65 mM with a SEP of 0.75 mM and a mean percent error of 6.67%. These results demonstrate the analytical utility of NIR spectroscopy for monitoring glucose and glutamine levels in mammalian and insect cell cultures.     

Al2O3／WO3／ZrO2固体强酸催化剂对正丁烷异构化的催化性能

 通过沉淀、回流、浸渍和焙烧等步骤制备了Al2O3／WO3／ZrO2固体强酸催化剂．采用XRD，N2吸附，UV－Vis光谱，NH3－TPD和H2－TPR等技术测定了Al2O3对WO3／ZrO2催化剂的结构、表面酸性、氧化还原性及正丁烷异构化反应性能的影响．结果表明，在WO3／ZrO2中引入适量的Al2O3对其表面酸强度及酸量无显著影响，但可使催化剂中的ZrO2组分以稳定的四方相形式存在，并能有效地抑制催化剂中WO3的聚集长大，从而提高催化剂的稳定性和正丁烷异构化的转化率和选择性．添加铂于Al2O3／WO3／ZrO2中可进一步提高其催化性能．还考察了催化剂的焙烧温度、Al含量、反应温度和反应气氛对正丁烷异构化反应的影响．     

A novel photoinduced ring opening and isomerization of adamantane-2-spiro isoxazolines using Mo(CO)6

The Mo(CO)₆-mediated photoinduced ring-opening reactions of adamantane isoxazolines involve novel rearrangement that provide enaminoketones as major products and β-hydroxy ketones as minor ones; in contrast, only β-hydroxy ketones and α,β-unsaturated ketones were obtained under thermal condition.     

Direct determination of estriol 3- and 16-glucuronides in pregnancy urine by column-switching liquid chromatography with electrospray tandem mass spectrometry

Using column-switching liquid chromatography/tandem mass spectrometry (LC-MS/MS), we developed an improved analytical method of urinary estriol glucuronides. This new method is derived predominantly from maternal and fetal precursors in pregnancy. We used in the following procedure: first, we filtered urine samples with a membrane filter. Next, we directly injected the 50 microL aliquot of urine samples onto a pre-column. Then, after activating the column-switching valve, we backflushed the loaded samples onto the C(18) analytical column. Urine samples can be assayed within 20 min without any sample preparation steps. We monitored separated estriol glucuronides by negative electrospray ionization (ESI) and selected-reaction monitoring (SRM). The calibration range of estriol-3-glucuronide (E3-3G) and estriol-16-glucuronide (E3-16G) was 0.1-20 microg/mL and the linearity of the method was 0.9984 for E3-3G and 0.9987 for E3-16G. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 10 ng/mL (E3-3G) and 5 ng/mL (E3-16G). The analytical recovery was over 85% and, in general, inter-day and intra-day variability for precision and accuracy were less than 10%. When applied to a pregnancy urine sample to biomedical monitoring of the function of the maternal/fetal unit, the proposed method allowed rapid and sensitive screening for the detection of E3-3G and E3-16G.     

A new thermoelectric material: CsBi4Te6

The highly anisotropic material CsBi(4)Te(6) was prepared by the reaction of Cs/Bi(2)Te(3) around 600 degrees C. The compound crystallizes in the monoclinic space group C2/m with a = 51.9205(8) A, b = 4.4025(1) A, c = 14.5118(3) A, beta = 101.480(1) degrees, V = 3250.75(11) A(3), and Z = 8. The final R values are R(1) = 0.0585 and wR(2) = 0.1127 for all data. The compound has a 2-D structure composed of NaCl-type [Bi(4)Te(6)] anionic layers and Cs(+) ions residing between the layers. The [Bi(4)Te(6)] layers are interconnected by Bi-Bi bonds at a distance of 3.2383(10) A. This material is a narrow gap semiconductor. Optimization studies on the thermoelectric properties with a variety of doping agents show that the electrical properties of CsBi(4)Te(6) can be tuned to yield an optimized thermoelectric material which is promising for low-temperature applications. SbI(3) doping resulted in p-type behavior and a maximum power factor of 51.5 microW/cm.K(2) at 184 K and the corresponding ZT of 0.82 at 225 K. The highest power factor of 59.8 microW/cm.K(2) at 151 K was obtained from 0.06% Sb-doped material. We report here the synthesis, physicochemical properties, doping characteristics, charge-transport properties, and thermal conductivity. Also presented are studies on n-type CsBi(4)Te(6) and comparisons to those of p-type.     

Design of molecular two-photon probes for in vivo imaging. 2H-Benzo[h]chromene-2-one derivatives

2H-Benzo[h]chromene-2-one derivatives showing appreciable water solubility, significant two-photon cross sections, high photostability, cell permeability, low toxicity, and ability to be converted to a protein TP probe have been developed by incorporating all of the needed functions within a small molecule.     

NO x Removal Characteristics in Plasma Plus Catalyst Hybrid Process

NO_x removal characteristics and NO conversion trends were investigated for plasma process, catalytic process, and plasma catalytic hybrid process. In the experiments, we studied effects of the flow rate and the carrier gas on the NO conversion in the plasma process, and effects of ammonia concentration and temperature on the NO_x removal in the catalytic process. We also investigated the synergetic effect of a plasma-catalytic hybrid process. Dielectric barrier discharge was combined with V₂O₅–WO₃/TiO₂ catalyst for removing nitrogen oxides. The maximum conversions of nitrogen oxides were approximately 52, 80, and 98% at the temperature of 100, 200, and 300°C, respectively. The optimal energy density, ammonia concentration, and ratio of nitrogen oxides exist for the highest removal of nitrogen oxides in the plasma catalytic hybrid process.     

A denitrogenative palladium-catalyzed cascade for regioselective synthesis of fluorenes

We herein report a denitrogenative palladium-catalyzed cascade for the modular and regioselective synthesis of polysubstituted fluorenes. Hydrazone facilitates the Pd(ii) to Pd(iv) oxidative addition in a Catellani pathway and is also the methylene synthon in the proposed reaction. Aryl iodides and 2-bromoarylaldehyde hydrazones undergo a norbornene-controlled tandem reaction sequence to give a broad scope of fluorenes in the presence of a palladium catalyst. The method described is scalable and adaptable to a three-component reaction with in situ generation of the hydrazone group. Preliminary mechanistic investigations have been conducted.

Hydrazone assists Pd(ii)/(iv) oxidative addition and is the methylene synthon in a palladium-catalyzed, norbornene-mediated regioselective synthesis of fluorenes.